Continuous Power – Triple Guaranteed

The ATS controller includes a high resolution 350×160 pixel screen that provides a clear and sharp display of key information.

The dashboards enable the user to access all the main data at the push of a button. The HMI is clearly defined with dedicated push-buttons, LED indicators and pop-up messages – making operation easy for all users.  Furthermore, all menus, alarms and timers are available in nine languages – making the system accessible to all.

A Flexible Solution That Goes above and Beyond

ATyS C55 and C65 are highly flexible controllers and work with all types of technology: contactor (CC), switch-based (PC), or circuit breaker (CB) class. Designed to be used with all types of MCCB and ACB, all parameters can be directly configured from the front face.

Engineered and manufactured in France, these controllers deliver the highest level of quality, design and functionality. All ATS controllers undergo end-of-line testing and are also tested extensively in Tesla Lab: an independent laboratory specialising in the testing of low-voltage equipment and assemblies. Tesla Lab also houses facilities that puts equipment to the test against the harshest environmental conditions including water resistance, dust ingress, chemical exposure, shock and vibration.

Exceeding Safety Standards – in Local Markets

Engineered to meet and exceed the most demanding global product safety standards – for local markets – the ATyS C55 and C65 controllers guarantee safe transfer in the harshest indoor and outdoor operating environments.

As a minimum, the ATyS C55 / C65 ATS controllers are compliant with IEC 61010-2-201 and with IEC 60947-6-1 when type tested with a certified RTSE. They also comply with GB / T 14048.11 for China including Annex C which is specific for stand-alone ATS controllers.

The ATyS C55 / 65 have also been designed to meet the requirements of installation standards IEC 60364, NFPA 70 and NFPA 110 whilst a specific version C66 will be available and certified to UL 1008 and UL 61010 requirements.

Suitable for indoor and outdoor applications with temperatures ranging from -30 °C to +70 °C, the controllers are water resistant up to a degree of IP 65 and UV protected according to NEMA 3R12.  The ATS controllers are also suitable for installation in the main distribution board with an overvoltage category of OVC III.

Comprehensive Metering and Monitoring – Made Easy

The ATyS C65 controller is fully compatible with Socomec’s power metering and monitoring system: DIRIS Digiware.

There is now no need to add extra voltage modules as the controller can replace voltage sensing modules when part of a Digiware system, providing the voltages of both sources on the same system with just one product.

All information is centralised through a gateway – DIRIS Digiware M-70 (din-rail) or D-70 (remote annunciator display) – with integrated webserver and Modbus TCP, SNMP or BACnet protocols to communicate with facility management software.

source= https://railway-news.com/socomec-ats-controllers-continuous-power-triple-guaranteed/

Top
%d blogcu bunu beğendi: